Camshaft mounting screws M8x90 mm and M6x54 mm for PD engines
Camshaft mounting bolts M8×90 mm and M6×54 mm for Pumpe-Düse engines: why they must always be replaced with new ones and what makes them special.
Find out moreCamshaft set Components
What a camshaft kit contains: camshaft, bearings, hydraulic tappets and bolts. What each part does and why they should be replaced together.
Find out moreUnit Injector System (UIS) - pot tappet and valve clearance
The hydraulic pot tappet in Unit Injector (Pumpe-Düse) engines: its design, how it takes up valve clearance and why it is replaced with the camshaft.
Find out moreHydraulic tappets - causes and consequences of the damage
Why hydraulic tappets wear, how to recognise the damage and what it means for the camshaft and the whole valve train.
Find out moreSpecifics of Unit Injector System (UIS) engines (pump - nozzle) system
How the Unit Injector System (Pumpe-Düse) works, why it puts high demands on the camshaft and what that means for engine repairs.
Find out moreHow to disassemble and assemble the camshafts
Step-by-step camshaft removal and installation: cylinder head check, clearances, bearing lubrication and bolt tightening on Pumpe-Düse engines.
Find out moreHow to prevent faults of the camshafts
The most common camshaft faults – breakage and seizure: causes in assembly and lubrication, photos of damage and how to prevent them.
Find out moreWhat kind of camshaft - made of steel or cast iron?
Steel or cast-iron camshaft? How both types are made, how they differ in hardness and durability, and when a cast-iron shaft is at risk of breaking.
Find out more








